Cost Of Septic Tank Cleaning Crystal Springs

As a septic system owner, you may want to try your best to stay septic safe. This is more important if you are around the opening of the septic tank. As a matter of fact, you should know all of the important safety precautions that should be taken prior to working on the septic system.

Follow the safety tips given below:

1. Septic tank lid
Make sure that the access port of your tank is covered with a solid lid. Make sure that the lid is strong enough. Kids should not be able to open it. If you have no idea as to how to install the system, you can call a professional for help. The company will be more than happy to help with the inspection.

2. The tank opening
You should never lean over the septic tank opening. The reason is that the gasses that come out of the tank may knock you out. You may also fall in the tank, which may prove fatal.

3. Driving Over The septic system
Driving heavy machine on the ground where the tank system is buried is not a good idea. Actually, you may have to bear heavy costs in order to get the broken pipes repaired. So, make sure you don’t drive heavy equipment or machinery on the ground where you buried the tank system.

Contact Info:
Name: Billy Fowler
Email: info@asapadvancedseptic.com
Organization: ASAP Advanced Septic & Drainage, Inc.
Address: 5011 E Busch Blvd, Tampa, FL 33617
Phone: (813) 986-6070

Septic Systems: The Inside Story

Septic Shock

A lot of rural homes are not linked to a mains sewer system. These houses count on a self-contained sewage treatment plant called a septic system. If you have a septic tank, or are thinking about the purchase of a house with one, there are life-saving facts you need to know about septic tanks. A sewage-disposal tank takes the sewage from your house, the solids settle out and grease drifts to the top. In between the two layers is a clear watery layer that is piped away to an absorption area where it is permitted to percolate away, through the soil. Soil germs break down any nutrients before the sewage reaches the water bearing rocks, or any streams. Septic tanks are typically buried in the ground. There are 3 main types, all of which cause various issues. Steel tanks rust, specifically when buried in the ground. A steel septic system can be so corroded that it can result in somebody walking over it falling through and into the tank. The unlucky person is suffocated by the methane generated in the tank, or drowns. Concrete tanks may be damaged internally, resulting in long-term and costly to remedy damage to the absorption drain-field. The worst tanks are those developed from concrete blocks on website. In some cases the blocks are simply laid and not sealed together. Even if they are sealed together years of attack from acidic sewage will dissolve the mortar. These tanks can collapse without warning and probably fail to fulfill regional preparation and environmental management guidelines. How do you tell if your septic system has issues? , if there are ANY locations of sunken ground around it STAY AWAY.. Hire a contractor right away. Into the septic tank and pass away if you step on these locations you could fall through. These are indications that your septic tank has partly collapsed. Check for signs of strong sewage material in the drain-field area. This can be really expensive to rectify if the drain-field has been infected because the septic tank has not been pumped out regularly. If you are buying a house with a septic tank, you must insist on the tank being drained and an examination by a sewage-disposal tank specialist carried out. It is not possible to examine a septic tank appropriately while it is complete. You may need to spend for a contractor to provide you a report, however this will be a tiny quantity compared to the expense of any required restorative work A septic tank takes the sewage from the house, the solids settle out and grease drifts to the top. Steel tanks rust, especially when buried in the ground. A steel septic tank can be so corroded that it can lead to someone walking over it falling through and into the tank. If you step on these areas you might fall through, into the septic tank and pass away. These are signs that your septic tank has actually partially collapsed.

 

Septic Treatment Solutions - Do They Work?

Sewer Snake

Bio-Clean Review

I hate plunging! I always feel icky and dirty after doing so.

The water from the toilet splashes all over, no matter how careful I may be. I always feel that I get at least some water on my pants making me feel as if I have to throw them immediately into the washer.

Even washing up immediately afterwards does not always make me feel clean and I feel as if I have to change all my clothes and take a full shower!

Then there's the plunger that must be rinsed off in the tub, then allowed to dry out and put back away. After doing so, I feel as if I have to once again wash my hands.

Then when you consider that you may wish to use the same plunger on different drains, such as the one in the bathroom or even in the kitchen sink, it becomes a pretty unsanitary condition.

What's worse, plunging all too often doesn't work! Or at least it doesn't work very well. True, it works to relieve mild stoppages. But it is pretty ineffective against major clogs.

Plungers Don't Always Work That Well

Take the act of trying to use a plunger in the toilet. Even a heavy duty, plumber style plunger doesn't always work all that well.

We have the type of plunger with the extra cup that pulls out from the bottom for a better fit. But it still doesn't fit the toilet well enough to create a very good suction.

The reason for this is plain to see: the plunger is perfectly round, or circular, while the opening in the toilet is oval-shaped. This means that it is not possible to form a very good seal where the plunger meets the opening.

We had a problem with our upstairs bathroom a couple weeks ago. The toilet after flushing did not always clear all of its contents. It was annoying to see this and wonder "did we flush or not?" We certainly had but it just hadn't all gone down.

So we tried plunging it, with all the mess and hassle described above. But still, it didn't seem to work very well. This was one clog that plunging just didn't seem to want to fix!

We tried going to the hardware store to see what else was available in the way of plungers. In addition to the standard plungers, we saw one plastic plunger that was shaped like a bellows and looked like it might be a bit better. But it was round and made of hard plastic and we knew that it wouldn't conform any better to the shape of the toilet drain than any other plunger.

We Noticed Problems With Our Drains

There were other problems with our drain. In fact, it was getting worse. When we ran the sink in the upstairs bathroom, we would sometimes hear a "bloop, bloop, bloop!" sound coming from the toilet. This indicated that there were air bubbles in the system that were not able to go through right away because of some kind of blockage.

When I was taking a shower, the water was starting to collect around my ankles because it was not draining properly. This despite the fact that the drain was open and there were no hairs blocking the outlet. Finally, whatever air bubble was blocking the system cleared itself and the water began to drain, but this took about ten minutes. Perhaps the warm water softened the blockage somewhere and allowed it to go down.

Obviously, some blockage was affecting all three drains in the upstairs bathroom-the sink, the toilet and the tub. This is because all three drains empty into the same sewer line.

(I am not saying the toilet water could back up into the tub or could even come out through the faucet in the sink! It's just that the blockage was lower down, where all three drains empty into the sewer line. This would explain why all three drains were exhibiting similar problems.)

Buy Bio-Clean on Amazon

Why not buy Bio-Clean from the world's most trusted online retailer?

Other Problems

This is not the first time we’ve had a problem with our drains. In one instance, the blockage in the toilet had been nearly complete. This was so severe it called for running a steel snake down into the toilet to try to clear it.

Alas! This caused more problems than it solved. The action of the snake damaged a presumably plastic drain pipe inside the system. The result? The next time someone took a shower, water dripped from the ceiling down onto the living room floor!

We had to call a plumber in to correct this mess. This meant an expensive plumber's bill as well as money needed to repair the damaged ceiling in the living room. The ceiling was never quite as good as new, and you can still see signs of the episode to this day.

What was the culprit in this mess? The plumber found a wad of dental floss in the sewer line. Someone had been disposing of dental floss in the toilet, something we later read should never be done and which we stopped doing immediately.

Unfortunately, it was too late! The damage was already done. The dental floss, instead of going down, had accumulated in the system, forming a permanent blockage.

The moral of the story? Never, ever dispose of dental floss in the toilet! Always dispose of it in the trash instead.

Back to our current problem, the drains were obviously running slow and plunging didn’t work! We could try using chemical drain cleaner, but we were very wary of doing this, since we know how fragile the pipes are and we certainly did not want a repeat of our earlier episode! So what to do?

Enter Bio-Clean

Fortunately, the plumber we had called about the dental floss problem recommended a great product called Bio-Clean.

What is Bio-Clean? It's a bacteria culture in a can, what is called “friendly bacteria,” that is harmless to people and plumbing but that actually eats biodegradable wastes, the cause of most stoppages.

You may be saying to yourself, what the heck is "friendly bacteria?" I know it sounds kind of weird, sort of like a science experiment that you carry out in your own home. The fact is that bacteria, or at least certain forms of it, has a very friendly relationship with what our bodies consider "waste."

Bacteria is used in municipal sanitation plants to break down sewer waste into harmless components so that the water can be returned to the ecosystem. Living creatures like humans have trillions of bacteria in their guts that help with the digestive process. So, bacteria and biodegradable materials have a very close relationship, and this has been so for millions of years.

How does this help you with your drains? Well, as time goes on and you use your drains, waste begins to accumulate on the inside surfaces of the pipes in your sewer system.

How Bio-Clean Works

It’s something like a blockage of the arteries. As a waste accumulates, it forms a thicker and thicker layer that eventually reduces the size of your sewer openings to a very small diameter. This causes slower and slower drains until, eventually, you must start plunging or use a caustic drain cleaner.

The problem is these methods don’t always work very well, as previously discussed.

The plunger attempts to use the force of suction to physically clear the blockage, but it’s impossible to totally clear months or years of accumulation. The drain opener gets more to the source of the problem, but it can be seriously bad for your bathroom pipes.

That’s where Bio-Clean comes in. The "friendly bacteria" in Bio-Clean love the substances that we consider waste and blockages and they literally eat it up! Yet they are 100% harmless to living or nonbiological substances such as the pipes themselves.

Look at a cross-section of a clogged pipe, and you will see years of accumulated slime piled up around the inner surfaces. This is what the bacteria in Bio-Clean consumes.

They feed, multiply and eat their way through all waste matter until it is all eaten up. They chemically change it into water, carbon and other harmless elements that are used by plant life and run right out of the waste system.

Where does Bio-Clean work?

Where does Bio-Clean work? In all the following areas:

Kitchen sinks

Lavatories

Bathtubs

Showers

Floor Drains

Laundry Drains

Garbage Disposals

Septic Tanks and Fields

Rv and Boat Holding Tanks

You can even add it to cat litter

What Are the Alternatives to Bio-Clean?

Compare Bio-Clean to mechanical equipment. As we discovered, cables can poke holes through the pipe. At best, they only leave a small opening through the mess which only leaves a base for new waste to adhere to.

Hot, caustic drain openers actually become diluted and weaker as they travel down through the pipes. They cannot defy gravity. They can only settle in a concentrated area or become weaker as they go down.

But the Bio-Clean family of friendly bacteria can digest vegetation and animal waste. They can defy gravity. They can work their way up as well as down!

It is important to note that Bio-Clean cannot repair broken pipes or mechanical defects or digest inorganic material such as baby toys or dental floss, as we discovered in our own drain. However, Bio-Clean will work for most normal blockages.

How do you use Bio-Clean?

How do you use Bio-Clean? Bio-Clean comes to you as an inert powder containing the bacteria culture, amylase, protease, cellulase and lipase enzymes.

The bacteria are in a state of "suspended animation," I guess you could say, (sort of like the old Sea Monkeys) but they "come to life" when they are added to water. You merely add a tablespoon full to your drains when they will be undisturbed for 6 to 8 hours, such as at nighttime. To give it the fullest time to work, repeat the treatment for five consecutive days.

In the instance of our clogged bathroom drain, we added it to both the toilet and the shower drain for one week.

What was the result? The sink drain no longer goes "bloop, bloop, bloop!"when we are running the water. The toilet flushes perfectly every time with no need for repeated flushings. The shower drains like when it was new. All this with no messy plunging or caustic chemicals!

Advantages of Bio-Clean

Bio-Clean may be a slight inconvenience for large families or households with only one bathroom since, for best results, it should be applied for five consecutive days. However, you can avoid even this slight inconvenience, once you get your drains cleared, simply by applying it once a month to all drains as a maintenance schedule. This will keep clogs from building up in the first place with minimal inconvenience.

Bio-Clean is also economical. A single can contains up to 100 drain treatments or will treat a 1000 US gallon septic tank.

I highly recommend Bio-Clean. It can replace plungers, caustic drain cleaners and even expensive plumber's bills. If it saves you one trip from the plumber, it will have paid for a lifetime of Bio-Clean!

Make friends with the friendly bacteria of Bio-Clean and you may never have to suffer from slow or clogged drains again!

Tips for Bio-Clean - Here are some handy tips to aid you in your use of Bio-Clean.

  1. In the Bio-Clean instructions, it says, "On multi-story buildings start initial treatment on the lowest level (e.g. basement) and progress to the top. Complete the five-day treatment on one floor before going on to the next higher floor." Tip: If the drains on the lower floors are running and have good flow you do not have to start on the lowest floor.
  2. In the Bio-Clean instructions, it says that "mouthwash should be disposed of into toilet." Tip: This refers not only to the 6 to 8 hours at bedtime when the drain is being treated but for the entire 5 to 6 consecutive days of drain treatment. You need to dispose of mouthwash this way during the entire 5 day treatment because Bio-Clean can continue working even after the sinks are being used again. Mouthwash, however, contains antibacterial agents that can destroy the residual action of Bio-Clean.
  3. Tip: Even though Bio-Clean can serve as an alternative to plunging, you can get better, faster results by doing an occasional plunging while using bio clean. This is because plunging can help break up the built-up wastes lining the pipes that Bio-Clean has loosened. This can give you faster and more complete results in clearing your drain blockages.

Overview On Septic Systems And the Inspection Process

Aeration Septic System

Municipal wastewater effluent contains pollutants that are destroying our environment. These effluents are discharged into lakes, ponds, rivers and oceans, killing sea life and even harming humans. The excess phosphorus causes the most common problem. Phosphorus is an essential part of our ecosystem which supports the growth algae and aquatic plants. Many fish depend on these algae and plants for their survival. But excess discharge of phosphorus as organic wastes in industrial effluent & sewerage is destroying the sea life. The algae grow unnaturally fast, disturbing the natural growth and thus the quality of the food for the fishes get destroyed. Fish respires on the oxygen under water, due to this reason the oxygen level decreases and they cannot survive. Phosphorus also releases dangerous chemicals and bacteria that harm us, if we come in contact with that contaminated water or eat fish from that polluted river.

- Inspection: Many tanks are reported to suffer from leaks and to get clogged. Any leakage or clogging can cause serious issues and spread out of pungent odors. To avoid this type of situations, you should make regular inspections of your tank.

- Additives: Many people try to reduce the pumping activities by using septic tank additives. These additives are said to break down the sludge and scum inside the reservoir.

Septic Treatment Solutions - Do They Work?

Septic Drain Field Pipe

Installing septic tank pump system becomes necessary for all those homeowners who live in the area having no municipal sewage system. These tanks are quite effective in treating and disposing off your discarded products. You should take special care in maintaining this tank pump system. Sometime homeowners also involve themselves in installation process.

Sometimes installing a septic tank pump becomes necessary especially in higher elevation areas. This pump works exceptionally well in pumping sewage to a distribution tank from septic chamber. Thus it ensures functionality of overall septic system. Though majority of septic systems is based on gravity but this assistance becomes impractical and sometimes impossible in some cases due to distance or terrain.

You should consider installing a pump in the septic tank in this situation just to ensure smooth supply of water to the filed lines directly from the tank. Well, this is a common technique that gives considerable difference from typical setup process of a septic tank system. Consider following step by step guideline to install your septic tank pump:

4 - Use direct burial wiring to connect pump motor with electricity. It is recommended having separate breaker for the pump motor. An added protection to pump could be placing Ground Fault Circuit Interruption breaker because such devices reduces electrical shocks or short circuit issues. Considering expert help is recommended especially if you don't know much about electrical wiring.

5 - Now add some water to your tank just to test the pump. The pump should activate itself once the tank reaches its predefined depth level. Shut off the pump once it moves out water. In the end, septic tank should be covered once you get confirmation that your septic tank pump is functioning properly.

So, these are a few precautions that you may want to take if you are going to work on a septic tank system. This is important should you want to keep you and your family safe around the system. When in doubt, it’s a good idea to call a local septic service in Crystal Springs . Hopefully, these tips will help.

SEPTIC TANK CARE | WHO TO CALL FOR SERVICE IN Crystal Springs

The septic tank is a very delicate feature of a house despite its size and its nature and it requires some very specific practices to keep it in good working order. Performing an inspection on a routine basis is vital to maintaining the tranquility of its processes and the effectiveness of its design. A common septic tank inspection that hits all of the major points should include the following items:

  1. An inspection of the tees and baffles of your septic system. The baffle is an important connection on the outside wall of your system, which is melded into the exterior during the manufacturing process. Concrete baffles are the most common cause of problems if they are not inspected properly for cracks and fractures, as this can indicate future failure. Tees are plastic tubing inserts that are used in cases where a baffle fails to be structurally sound and they are generally made out of PVC piping like a lot of your drain tubing.
  2. A proper check for water back-washing into the tank, after the septic tank has been fully pumped of all its contents. Water, whether it enters the tank from the pipes of your house or the pipes from the outlets in the drain field, can indicate a potentially serious problem. During this segment, it is imperative that you do not use the water in your house, as it could skew the results and create a false positive. If you have water coming from your house into the tank without running water, it means that you most likely have an issue with a leaking pipe. Water washing back into the tank from the outlet pipes generally indicates that you have a clog in the drain field. Both situations will require your immediate attention.
  3. Checking the effluence filter for proper water flow. If the effluent water is unable to successfully leave the tank or if you have unfiltered water leaving the tank and traveling to the drain field, you could have a serious problem. The inspector will remove and clean the septic filter and outlet pipes to ensure it is working properly.
  4. A complete examination of the septic risers is important. Risers are dense plastic or concrete tubes and covers that seal off the access to your septic tank as a safety measure. The inspector will check the structural integrity of the risers to ensure that they are able to safely protect access to the tank, as well as making sure they seal properly.

Just like the functioning of all complex systems, a septic tank requires a routine checkup and possible maintenance to keep it working properly. If you neglect to get your septic system inspected by a licensed professional on a regular basis, you could end up with very costly household damage or you could risk contaminating the groundwater with foul septic water. A complete septic inspection will help you correct any potential problems that could arise and it will give you peace of mind knowing that you have done everything you need to do to keep your septic system running efficiently.


Pasco Drainfield Repair

Home