Home

To understand what is involved in septic tank pumping, it is first important to understand what a septic system is, what it does and how it works. A septic system is, very simply, an underground treatment system for household sewage. A typical septic system consists of 4 components: the pipe from the house, the septic tank, a drain field and the soil. Damage or malfunction of any of these components can cause the system to fail which can result in soil and drinking water contamination and costly repairs or replacements by the homeowner.

Contact Info:
Name: Billy Fowler
Email: info@asapadvancedseptic.com
Organization: ASAP Advanced Septic & Drainage, Inc.
Address: 5011 E Busch Blvd, Tampa, FL 33617
Phone: (813) 986-6070

Septic Tank MaintenanceSeptic Tank Alarm

4 Steps to Perfect Septic Inspections

Installing septic tank pump system becomes necessary for all those homeowners who live in the area having no municipal sewage system. These tanks are quite effective in treating and disposing off your discarded products. You should take special care in maintaining this tank pump system. Sometime homeowners also involve themselves in installation process.

Sometimes installing a septic tank pump becomes necessary especially in higher elevation areas. This pump works exceptionally well in pumping sewage to a distribution tank from septic chamber. Thus it ensures functionality of overall septic system. Though majority of septic systems is based on gravity but this assistance becomes impractical and sometimes impossible in some cases due to distance or terrain.

You should consider installing a pump in the septic tank in this situation just to ensure smooth supply of water to the filed lines directly from the tank. Well, this is a common technique that gives considerable difference from typical setup process of a septic tank system. Consider following step by step guideline to install your septic tank pump:

4 - Use direct burial wiring to connect pump motor with electricity. It is recommended having separate breaker for the pump motor. An added protection to pump could be placing Ground Fault Circuit Interruption breaker because such devices reduces electrical shocks or short circuit issues. Considering expert help is recommended especially if you don't know much about electrical wiring.

5 - Now add some water to your tank just to test the pump. The pump should activate itself once the tank reaches its predefined depth level. Shut off the pump once it moves out water. In the end, septic tank should be covered once you get confirmation that your septic tank pump is functioning properly.

How it works

A very basic explanation of how the system works begins with waste water leaving the house through the plumbing network inside the house to the pipe leading to the septic tank. The tank is buried underground and is usually constructed in a water tight manner of concrete, fiberglass or polyethylene. It is intended to hold the waste water long enough to allow the solids to settle to the bottom (to form sludge) and the oils to float to the top (to form scum). Some of the solid waste decomposes as well. There are compartments and a “t” shaped outlet from the septic tank that prevents the sludge and scum from leaving the tank to travel to the drain fields. Once the liquid enters the drain field, it is filtered through the several layers of soil for the final treatment by removal of harmful bacteria, viruses and nutrients.

Sepsis InfectionAffordable Plumbing

Septic Tank Pumping - How Your Septic System Works and Maintenance Tips

As a home inspector, I hear complaints from real estate agents every week about septic system failures. The story always goes like this. The buyer loved the home. The inspector suggested there may be a problem with the septic system. The buyer ignored the inspector's warnings and bought anyway. And the buyer ends up with a home that is ruined with seeping sewage within just a few years.

It is easy to blame the seller in this situation, and believe that he intentionally misrepresented the home.

This is often unfair to the seller, who does not know any better than the buyer that the septic system is on its last legs at the time of the sale. However, this does not change the sad fact that the buyer, who is already leveraged on an expensive home (particularly in New Jersey, where annual property taxes normally run in the tens of thousands of dollars), then has a septic repair job on their hands that costs several thousand dollars.

7) If the seller refuses to be at the home on the day of the inspection, this is a red flag for consideration. Tell him you would like to keep him in the loop, and you would appreciate if he comes to every meeting.

Septic System Inspection: Money Well-Spent

For both the buyer and the seller, the cost of a septic system inspection is well worth the money. The buyer gets peace of mind knowing he will not have to replace his septic system at a moment's notice. Also, the seller protects himself from a lawsuit, as the contractors he hires become the targets for litigation.

Maintaining a regular schedule of septic tank pumping will help keep your system running efficiently and will save you hundreds of dollars in expensive system repairs.