Septic Installation Bowling Green FL

As a septic system owner, you may want to try your best to stay septic safe. This is more important if you are around the opening of the septic tank. As a matter of fact, you should know all of the important safety precautions that should be taken prior to working on the septic system.

Follow the safety tips given below:

1. Septic tank lid
Make sure that the access port of your tank is covered with a solid lid. Make sure that the lid is strong enough. Kids should not be able to open it. If you have no idea as to how to install the system, you can call a professional for help. The company will be more than happy to help with the inspection.

2. The tank opening
You should never lean over the septic tank opening. The reason is that the gasses that come out of the tank may knock you out. You may also fall in the tank, which may prove fatal.

3. Driving Over The septic system
Driving heavy machine on the ground where the tank system is buried is not a good idea. Actually, you may have to bear heavy costs in order to get the broken pipes repaired. So, make sure you don’t drive heavy equipment or machinery on the ground where you buried the tank system.

Contact Info:
Name: Billy Fowler
Email: info@asapadvancedseptic.com
Organization: ASAP Advanced Septic & Drainage, Inc.
Address: 5011 E Busch Blvd, Tampa, FL 33617
Phone: (813) 986-6070

The Importance of a Septic Inspection

Septic Tank Systems

Septic tank systems become clogged with roots in the leach lines, leach field, drain field or seepage field, causing backup of wastewater into the house. The inexpensive fix is to use copper sulfate through an installed cleanout or septic field pump.

Septic tank systems

Septic tank systems do not last forever and replacing one is a very expensive proposition. If your house is connected to the city sewer system, then you do not have a septic tank. A septic tank can be described as your very own little sewage treatment plant. There are three basic elements of a septic system:

  1. The septic line that carries sewage and waste water from your house to the tank. There is usually a cleanout plug at the house-end it so that you can run a snake down it to remove obstructions.
  2. The septic tank itself where sewage is held while undergoing decomposition. This is underground, probably under a grassy area, and has a cover that is usually buried in residential installations.
  3. The leach field, also referred to as a drain field or seepage field. This is a branching network of underground porous trenches, pipes or something similar that carries the clear liquid from the septic tank throughout adjacent soil where it is absorbed.

A clogged leach field

Eventually leach fields become clogged because the roots from trees and other vegetation are attracted to the nutrient-rich effluent. The roots grow through the pores intended to drain the liquid, seepage gradually slows or stops.

If sufficient pressure cannot be released through the pores of the leach field, the entire septic system cannot accept any more waste water and it backs up in the house, usually at a low point such as a shower or tub drain. If it gets that bad, you may have to replace the entire leach field. In many localities, that will require a building permit and meeting current building codes, which means replacing the entire septic system, which is expensive, etc.

Kill roots with copper sulfate

Since this is obviously something to avoid, you can often extend the life of the old system by taking action when sewage flow has slowed, but not completely stopped. Copper sulfate kills roots. If it can be placed into the system so that it will flow through the leach field, the roots will die (but not the plants) and waste water will begin to flow more freely again after a few weeks. In many systems, this isn’t as easy as it sounds, because copper sulfate is so heavy that it will settle to the bottom of the septic tank unless inserted into the leach line leading from the tank. If you have a cleanout or other access there, you’re all set, but many residential systems do not. I prefer the crystal form over the powder because it's easier to handle, cheaper and dissolves more slowly, .

Install a leach line cleanout

If necessary, it is not very expensive to have a cleanout installed in the leach line expressly for the purpose of adding copper sulfate periodically. If that still doesn’t quite work, or if you want to be sure the stuff is going to flow more quickly, you can pump it through the leach field.

It is possible to install a pump on the leach line cleanout between the septic tank and the leach field. It can be buried below ground level or installed above ground and concealed with landscape bushes. The pump turns on and off automatically to maintain a slight pressure on the waste water, pushing it through the pores of the seepage field. Adding copper sulfate at intervals through a cleanout at this point is effective to drive the chemical towards the offending roots.

Killing the roots may extend the life of the septic system a few years, but it will ultimately need to be replaced with a completely modern one—unless you can successfully lobby for a neighborhood hook-up, of course.

 

Bio-Clean Drain Cleaner Review

Septic Tank Systems

Two Components

Class 4 septic systems are divided into two components, the septic tank and the septic field or leaching bed. Waste is piped out of the house into the septic tank, which is essentially a water clarification tank, in which anaerobic bacteria break the waste down into solids (sludge), liquid effluent, and scum.

Septic System

The solids settle to the bottom, the scum floats to the top and the liquid effluent flows through an outlet pipe into a distribution chamber, where it is directed to the septic field. The septic field is an effluent water disposal system, where the liquid is channeled through perforated pipes to different parts of a field of loose gravel.

Septic tank materials that initially float in the scum layer are kept out of the drainage system by an outflow tee or baffle. If the tank is not pumped regularly, the level of solids can rise, and if it approaches the level of the outflow tee, scum and solids can proceed out into the drainage system, clogging the pipes and gravel - and eventually preventing the absorption of the water by the surrounding earth.

A Class 5 septic system is a holding tank for the storage of sewage at the site where it is produced. A typical holding tank system is comprised of a single compartment tank with a pump-out stack and an audible or visual warning device to alert the homeowner when the tank requires emptying. A holding tank is costly to operate, places restrictions of the owner, and is dependent on Class 7 (hauled) sewage system for waste collection and disposal.

General Guidelines for Purchasers

  • If the system is 5-7 years old and has never been pumped it is unlikely that there are serious problems.
  • If there is no record of the system having been pumped but the owner has a vague recollection of pumping the system at some time in the distant past, figure that it has never been pumped.
  • If the system is over 10 years old and has never been pumped, it is possible that there has been some damage to the septic field, and if it's not been pumped for over 15 years it is quite likely.
  • Flushing dye through the system looks good but will only indicate systems that are already seriously clogged, in which case there should already be more obvious signs.
  • Flushing dye may not indicate serious defects or indicate systems that are close to failure but still functional.
  • If you are on a septic system, adding a bedroom, even without adding a bathroom, may mean having to increase the size of the tank and drainage field.

The only way to make an accurate determination of the system is to have a licensed septic contractor perform a tank, distribution chamber and field inspection.

Septic Tanks - A Necessity for Our Environment

septic care tips

The septic tank is a very delicate feature of a house despite its size and its nature and it requires some very specific practices to keep it in good working order. Performing an inspection on a routine basis is vital to maintaining the tranquility of its processes and the effectiveness of its design. A common septic tank inspection that hits all of the major points should include the following items:

  1. An inspection of the tees and baffles of your septic system. The baffle is an important connection on the outside wall of your system, which is melded into the exterior during the manufacturing process. Concrete baffles are the most common cause of problems if they are not inspected properly for cracks and fractures, as this can indicate future failure. Tees are plastic tubing inserts that are used in cases where a baffle fails to be structurally sound and they are generally made out of PVC piping like a lot of your drain tubing.
  2. A proper check for water back-washing into the tank, after the septic tank has been fully pumped of all its contents. Water, whether it enters the tank from the pipes of your house or the pipes from the outlets in the drain field, can indicate a potentially serious problem. During this segment, it is imperative that you do not use the water in your house, as it could skew the results and create a false positive. If you have water coming from your house into the tank without running water, it means that you most likely have an issue with a leaking pipe. Water washing back into the tank from the outlet pipes generally indicates that you have a clog in the drain field. Both situations will require your immediate attention.
  3. Checking the effluence filter for proper water flow. If the effluent water is unable to successfully leave the tank or if you have unfiltered water leaving the tank and traveling to the drain field, you could have a serious problem. The inspector will remove and clean the septic filter and outlet pipes to ensure it is working properly.
  4. A complete examination of the septic risers is important. Risers are dense plastic or concrete tubes and covers that seal off the access to your septic tank as a safety measure. The inspector will check the structural integrity of the risers to ensure that they are able to safely protect access to the tank, as well as making sure they seal properly.

Just like the functioning of all complex systems, a septic tank requires a routine checkup and possible maintenance to keep it working properly. If you neglect to get your septic system inspected by a licensed professional on a regular basis, you could end up with very costly household damage or you could risk contaminating the groundwater with foul septic water. A complete septic inspection will help you correct any potential problems that could arise and it will give you peace of mind knowing that you have done everything you need to do to keep your septic system running efficiently.

What Is Septic Tank Cleaning?

Septic Tank Chemicals

Do you know people who have had to spend thousands of dollars for the repair or replacement of their septic systems? How about the expense of cleaning up or repairing the house and yard from damage caused by septic backup? Septic system backups create unhealthy and very unpleasant smelling conditions on your property, both inside the house as well as outside the house. If you have a septic system on your property, septic tank pumping should be a very high priority and concern.

All septic tanks need to be pumped out (emptied) and the system inspected periodically. How often should you have your system pumped and inspected? Most septic service companies in Molalla recommend septic tank pumping is done every 3 to 5 years, depending on several variables. Those variables are septic tank size, number of people in the household and the amount of water going into the system.

Having your septic system inspected can save money in costly repairs or replacement. Your local septic service company can inspect the valves, drain field, water inlet and outlets and the general condition of your tank to catch problems before they become a costly repair. Most septic tank pumping and service companies in Molalla will be able to make the repairs or replacements. Your local septic service company can also recommend additives to your tank to help control the sludge and scum that can be part of that expensive septic system failure that you want to avoid.

So, these are a few precautions that you may want to take if you are going to work on a septic tank system. This is important should you want to keep you and your family safe around the system. When in doubt, it’s a good idea to call a local septic service in Bowling Green FL . Hopefully, these tips will help.

SEPTIC TANK CARE | WHO TO CALL FOR SERVICE IN Bowling Green FL

While having a septic system at home is great, it is also a big responsibility. You need to get your pump cleaned every two or three years depending on various factors. This should be done so that the whole system works smoothly and you won't have to keep repairing or even replacing the tank.

Important Factors to Consider

Lifestyle: The two major lifestyle factors that affect the septic system are the age of people living in the house and the amount of water that is used at home. Age is an important factor because houses with young children and growing families often use a lot more water and they don't really watch what is being put down the drains. On the other hand, older people, especially couples living on their own, often do not use as much water. So when there is less water being used at home, less solid mater is put down the drain along with the water.

When you get your tank pumped, it is advisable to get it inspected as well. Most companies who offer septic services also have certified inspectors who will let you know if there is any damage to the septic system and if any repairs need to be conducted. If you can put in this little effort and ensure that the whole system is cleaned out and inspected occasionally, your septic tank won't only last you for years but it will also work smoothly and manage wastewater effectively.


Polk Septic System Pump Out

Home