Septic Tank Cleaning Cost Safety Harbor

As a septic system owner, you may want to try your best to stay septic safe. This is more important if you are around the opening of the septic tank. As a matter of fact, you should know all of the important safety precautions that should be taken prior to working on the septic system.

Follow the safety tips given below:

1. Septic tank lid
Make sure that the access port of your tank is covered with a solid lid. Make sure that the lid is strong enough. Kids should not be able to open it. If you have no idea as to how to install the system, you can call a professional for help. The company will be more than happy to help with the inspection.

2. The tank opening
You should never lean over the septic tank opening. The reason is that the gasses that come out of the tank may knock you out. You may also fall in the tank, which may prove fatal.

3. Driving Over The septic system
Driving heavy machine on the ground where the tank system is buried is not a good idea. Actually, you may have to bear heavy costs in order to get the broken pipes repaired. So, make sure you don’t drive heavy equipment or machinery on the ground where you buried the tank system.

Contact Info:
Name: Billy Fowler
Email: info@asapadvancedseptic.com
Organization: ASAP Advanced Septic & Drainage, Inc.
Address: 5011 E Busch Blvd, Tampa, FL 33617
Phone: (813) 986-6070

Preparing Your Budget For Septic Tank Pumping Cost

Sewage Treatment

When doing a search for "septic system" you will find many companies offering products that will amazingly clear up all of your septic problems and save you the cost of having to install new leach fields.

When considering a product like this I think a little common sense must be exercised. First of all, let's consider a few things before you rush out and purchase one of these products.

The first thing you want to think about is what type of septic system do you have? In a traditional gravel system there are a few common things that will cause your septic system to fail. I have listed these below.

Outlet baffle has disintegrated and solid material is making its way into the leach fields. Keep in mind that some older tanks do not have a center wall baffle dividing the tank into two separate compartments -- when this happens there is nothing to prevent solid material from making its way into the drain field once the outlet baffle has failed.

I won't go into other issues regarding the failure of alternative septic systems as the reasons for failure are just too many to list in one short writing. Suffice it to say you should go back to the original installer of your system and let them do the troubleshooting. The reasons for alternative septic system failure can be the same as those listed above, but can also be attributed to the mechanical components. If you are overly ambitious you can attempt to educate yourself on how your alternative septic system works and troubleshoot yourself, but I believe it wise to find a professional and have them assess the situation. Often times a good installer will be willing to troubleshoot the problem for free and provide you an estimate to repair the work. Best to call a Licensed Septic System Company to be certain your waste water tank and drain field are working properly.

 

What Is Septic Tank Cleaning?

Sepsis Infection

The septic tank is a very delicate feature of a house despite its size and its nature and it requires some very specific practices to keep it in good working order. Performing an inspection on a routine basis is vital to maintaining the tranquility of its processes and the effectiveness of its design. A common septic tank inspection that hits all of the major points should include the following items:

  1. An inspection of the tees and baffles of your septic system. The baffle is an important connection on the outside wall of your system, which is melded into the exterior during the manufacturing process. Concrete baffles are the most common cause of problems if they are not inspected properly for cracks and fractures, as this can indicate future failure. Tees are plastic tubing inserts that are used in cases where a baffle fails to be structurally sound and they are generally made out of PVC piping like a lot of your drain tubing.
  2. A proper check for water back-washing into the tank, after the septic tank has been fully pumped of all its contents. Water, whether it enters the tank from the pipes of your house or the pipes from the outlets in the drain field, can indicate a potentially serious problem. During this segment, it is imperative that you do not use the water in your house, as it could skew the results and create a false positive. If you have water coming from your house into the tank without running water, it means that you most likely have an issue with a leaking pipe. Water washing back into the tank from the outlet pipes generally indicates that you have a clog in the drain field. Both situations will require your immediate attention.
  3. Checking the effluence filter for proper water flow. If the effluent water is unable to successfully leave the tank or if you have unfiltered water leaving the tank and traveling to the drain field, you could have a serious problem. The inspector will remove and clean the septic filter and outlet pipes to ensure it is working properly.
  4. A complete examination of the septic risers is important. Risers are dense plastic or concrete tubes and covers that seal off the access to your septic tank as a safety measure. The inspector will check the structural integrity of the risers to ensure that they are able to safely protect access to the tank, as well as making sure they seal properly.

Just like the functioning of all complex systems, a septic tank requires a routine checkup and possible maintenance to keep it working properly. If you neglect to get your septic system inspected by a licensed professional on a regular basis, you could end up with very costly household damage or you could risk contaminating the groundwater with foul septic water. A complete septic inspection will help you correct any potential problems that could arise and it will give you peace of mind knowing that you have done everything you need to do to keep your septic system running efficiently.

Cesspool Inspection When Buying a House

New Septic Tank Cost

Septic tank systems become clogged with roots in the leach lines, leach field, drain field or seepage field, causing backup of wastewater into the house. The inexpensive fix is to use copper sulfate through an installed cleanout or septic field pump.

Septic tank systems

Septic tank systems do not last forever and replacing one is a very expensive proposition. If your house is connected to the city sewer system, then you do not have a septic tank. A septic tank can be described as your very own little sewage treatment plant. There are three basic elements of a septic system:

  1. The septic line that carries sewage and waste water from your house to the tank. There is usually a cleanout plug at the house-end it so that you can run a snake down it to remove obstructions.
  2. The septic tank itself where sewage is held while undergoing decomposition. This is underground, probably under a grassy area, and has a cover that is usually buried in residential installations.
  3. The leach field, also referred to as a drain field or seepage field. This is a branching network of underground porous trenches, pipes or something similar that carries the clear liquid from the septic tank throughout adjacent soil where it is absorbed.

A clogged leach field

Eventually leach fields become clogged because the roots from trees and other vegetation are attracted to the nutrient-rich effluent. The roots grow through the pores intended to drain the liquid, seepage gradually slows or stops.

If sufficient pressure cannot be released through the pores of the leach field, the entire septic system cannot accept any more waste water and it backs up in the house, usually at a low point such as a shower or tub drain. If it gets that bad, you may have to replace the entire leach field. In many localities, that will require a building permit and meeting current building codes, which means replacing the entire septic system, which is expensive, etc.

Kill roots with copper sulfate

Since this is obviously something to avoid, you can often extend the life of the old system by taking action when sewage flow has slowed, but not completely stopped. Copper sulfate kills roots. If it can be placed into the system so that it will flow through the leach field, the roots will die (but not the plants) and waste water will begin to flow more freely again after a few weeks. In many systems, this isn’t as easy as it sounds, because copper sulfate is so heavy that it will settle to the bottom of the septic tank unless inserted into the leach line leading from the tank. If you have a cleanout or other access there, you’re all set, but many residential systems do not. I prefer the crystal form over the powder because it's easier to handle, cheaper and dissolves more slowly, .

Install a leach line cleanout

If necessary, it is not very expensive to have a cleanout installed in the leach line expressly for the purpose of adding copper sulfate periodically. If that still doesn’t quite work, or if you want to be sure the stuff is going to flow more quickly, you can pump it through the leach field.

It is possible to install a pump on the leach line cleanout between the septic tank and the leach field. It can be buried below ground level or installed above ground and concealed with landscape bushes. The pump turns on and off automatically to maintain a slight pressure on the waste water, pushing it through the pores of the seepage field. Adding copper sulfate at intervals through a cleanout at this point is effective to drive the chemical towards the offending roots.

Killing the roots may extend the life of the septic system a few years, but it will ultimately need to be replaced with a completely modern one—unless you can successfully lobby for a neighborhood hook-up, of course.

Septic System Inspection - 7 Things the Seller May Not Be Telling You

Concrete Septic Tank

Septic tank systems become clogged with roots in the leach lines, leach field, drain field or seepage field, causing backup of wastewater into the house. The inexpensive fix is to use copper sulfate through an installed cleanout or septic field pump.

Septic tank systems

Septic tank systems do not last forever and replacing one is a very expensive proposition. If your house is connected to the city sewer system, then you do not have a septic tank. A septic tank can be described as your very own little sewage treatment plant. There are three basic elements of a septic system:

  1. The septic line that carries sewage and waste water from your house to the tank. There is usually a cleanout plug at the house-end it so that you can run a snake down it to remove obstructions.
  2. The septic tank itself where sewage is held while undergoing decomposition. This is underground, probably under a grassy area, and has a cover that is usually buried in residential installations.
  3. The leach field, also referred to as a drain field or seepage field. This is a branching network of underground porous trenches, pipes or something similar that carries the clear liquid from the septic tank throughout adjacent soil where it is absorbed.

A clogged leach field

Eventually leach fields become clogged because the roots from trees and other vegetation are attracted to the nutrient-rich effluent. The roots grow through the pores intended to drain the liquid, seepage gradually slows or stops.

If sufficient pressure cannot be released through the pores of the leach field, the entire septic system cannot accept any more waste water and it backs up in the house, usually at a low point such as a shower or tub drain. If it gets that bad, you may have to replace the entire leach field. In many localities, that will require a building permit and meeting current building codes, which means replacing the entire septic system, which is expensive, etc.

Kill roots with copper sulfate

Since this is obviously something to avoid, you can often extend the life of the old system by taking action when sewage flow has slowed, but not completely stopped. Copper sulfate kills roots. If it can be placed into the system so that it will flow through the leach field, the roots will die (but not the plants) and waste water will begin to flow more freely again after a few weeks. In many systems, this isn’t as easy as it sounds, because copper sulfate is so heavy that it will settle to the bottom of the septic tank unless inserted into the leach line leading from the tank. If you have a cleanout or other access there, you’re all set, but many residential systems do not. I prefer the crystal form over the powder because it's easier to handle, cheaper and dissolves more slowly, .

Install a leach line cleanout

If necessary, it is not very expensive to have a cleanout installed in the leach line expressly for the purpose of adding copper sulfate periodically. If that still doesn’t quite work, or if you want to be sure the stuff is going to flow more quickly, you can pump it through the leach field.

It is possible to install a pump on the leach line cleanout between the septic tank and the leach field. It can be buried below ground level or installed above ground and concealed with landscape bushes. The pump turns on and off automatically to maintain a slight pressure on the waste water, pushing it through the pores of the seepage field. Adding copper sulfate at intervals through a cleanout at this point is effective to drive the chemical towards the offending roots.

Killing the roots may extend the life of the septic system a few years, but it will ultimately need to be replaced with a completely modern one—unless you can successfully lobby for a neighborhood hook-up, of course.

So, these are a few precautions that you may want to take if you are going to work on a septic tank system. This is important should you want to keep you and your family safe around the system. When in doubt, it’s a good idea to call a local septic service in Safety Harbor . Hopefully, these tips will help.

SEPTIC TANK CARE | WHO TO CALL FOR SERVICE IN Safety Harbor

While having a septic system at home is great, it is also a big responsibility. You need to get your pump cleaned every two or three years depending on various factors. This should be done so that the whole system works smoothly and you won't have to keep repairing or even replacing the tank.

Important Factors to Consider

Lifestyle: The two major lifestyle factors that affect the septic system are the age of people living in the house and the amount of water that is used at home. Age is an important factor because houses with young children and growing families often use a lot more water and they don't really watch what is being put down the drains. On the other hand, older people, especially couples living on their own, often do not use as much water. So when there is less water being used at home, less solid mater is put down the drain along with the water.

When you get your tank pumped, it is advisable to get it inspected as well. Most companies who offer septic services also have certified inspectors who will let you know if there is any damage to the septic system and if any repairs need to be conducted. If you can put in this little effort and ensure that the whole system is cleaned out and inspected occasionally, your septic tank won't only last you for years but it will also work smoothly and manage wastewater effectively.


Pinellas Leach Field Replacement

Home